公司新聞
WR2300V路面冷再生機的使用特點
來源：http:/// 日期：2022-01-21
1、 康明斯KTA19-C600柴油發動機，額定功率600馬力，適應國內柴油，動力強勁，功率貯備大，可靠性高，維護保養方便；
1. Cummins kta19-c600 diesel engine, with a rated power of 600 HP, is suitable for domestic diesel, with strong power, large power reserve, high reliability and convenient maintenance;
2、 可靠的散熱系統，適應最炎熱的夏季施工，發動機水溫及液壓油溫達始終處于工作溫區；
2. The reliable heat dissipation system is suitable for the hottest summer construction, and the engine water temperature and hydraulic oil temperature are always in the working temperature zone;
3、 液壓系統主元件采用丹佛斯（原Sauer- Danfoss）系統，可靠性高；
3. Danfoss (formerly Sauer Danfoss) system is adopted as the main component of the hydraulic system, with high reliability;
4、 銑刨轉子設有8個工作擋，可跟據不同的路基強度，調整銑刨鼓轉速，確保機器工作速度更快，同時降低刀具的損耗，在滿足破碎粒度要求的同時，避免混合料離析；對于高強度的水泥穩定路基，二灰碎石路基，灰土路基，穩定土拌和等，均可全面適應工作要求；
4. The milling rotor is equipped with 8 working blocks, which can adjust the rotation speed of the milling drum according to different subgrade strength to ensure faster working speed of the machine, reduce tool loss and avoid mixture segregation while meeting the requirements of crushing particle size; For high-strength cement stabilized subgrade, lime fly ash macadam subgrade, lime soil subgrade and stabilized soil mixing, they can fully meet the work requirements;
5、 重型銑刨鼓經強化設計，在各種惡劣工況下更耐磨耗，采用焊接基座，可更換刀庫（齒套），刀具三件組合型式。刀庫（齒套）均為可拆式，刀具與刀庫磨損后均可在現場快速更換，適應高強度的連續水穩路基冷再生施工；銑刨刀齒采用22型，使用壽命長，更耐磨損；銑刨鼓經動平衡調整，采用專用檢具檢測，裝配精度高，運轉平穩；
5. The heavy-duty milling drum is strengthened and designed to be more wear-resistant under various harsh working conditions. It adopts welded base, replaceable tool magazine (gear sleeve) and three piece tool combination. The tool magazine (gear sleeve) is detachable, and the tool and tool magazine can be quickly replaced on site after wear, so as to adapt to the cold regeneration construction of high-strength continuous water stabilized subgrade; The milling cutter teeth are of type 22, with long service life and more wear resistance; The milling drum is adjusted by dynamic balance and tested by special inspection tools, with high assembly accuracy and stable operation;
6、 機器行走設有三個檔位，水穩路基冷再生采用行走I檔，行走速度控制精確，高負荷工況操控方便，輕負荷路基再生采用行走II檔，更大的速度調節范圍，行走III檔用于機器轉場；
6. The machine is equipped with three gears. The water stabilized subgrade cold regeneration adopts the traveling gear I, with accurate traveling speed control and convenient operation under high load conditions. The light load subgrade regeneration adopts the traveling gear II, with a larger speed adjustment range. The traveling gear III is used for the machine transfer;
7、 全電控雙方向盤操作系統，合理布置的儀表顯示多種工作參數，操控精確方便，機器可方便靠左側或右側貼邊施工；
7. Fully electric control dual steering wheel operating system, reasonably arranged instruments display a variety of working parameters, accurate and convenient operation, and the machine can be conveniently constructed on the left or right side;
8、 添加劑噴灑（噴水）采用丹麥技術自吸泵，電控調節，控制方便，流量穩定，精確可靠；
8. The additive spraying (water spraying) adopts Danish technology self-priming pump, with electric control adjustment, convenient control, stable flow, accuracy and reliability;
9、 后置水箱，支持無水車獨立冷再生施工；
9. The rear water tank supports the independent cold regeneration construction of anhydrous vehicle;
10、 鉸接車身轉向與轉向后橋相配合，轉向靈活，后橋具有一鍵自動回中功能，無論后橋轉向位于何種角度，均可一鍵操作后橋轉向自動回中，大大降低操作人員疲勞強度，提高工作效率；
10. The articulated body steering is matched with the steering rear axle, which is flexible. The rear axle has the function of one key automatic centering. No matter what angle the rear axle steering is at, the rear axle steering can be operated by one key, which greatly reduces the fatigue intensity of operators and improves work efficiency;
11、 雙橋四輪驅動，配以人字輪胎，驅動力強勁，適應各種路況作業；
11. Double axle four-wheel drive, equipped with herringbone tires, strong driving force, suitable for various road conditions;
12、 加壓液壓油箱配以德國進口吸回油濾油器，經過多年的使用驗證考核，是可靠的濾油系統，可長期保持液壓系統的清潔度，是液壓泵馬達長壽命的可靠保障；
12. The pressurized hydraulic oil tank is equipped with a suction return oil filter imported from Germany. After years of use verification and assessment, it is a reliable oil filtering system, which can maintain the cleanliness of the hydraulic system for a long time, and is a reliable guarantee for the long life of the hydraulic pump motor;
13、 液壓系統全面采用H型管接頭，國際標準管接頭，全車無焊接硬管，管路密封可靠性高，有效防止液壓油滲漏。
13. The hydraulic system fully adopts H-type pipe joint and international standard pipe joint. There is no welded hard pipe in the whole vehicle. The pipeline sealing reliability is high, which can effectively prevent hydraulic oil leakage.
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：