冷再生技術質量檢查程序與設備有關嗎？_行業資訊

行業資訊

冷再生技術質量檢查程序與設備有關嗎？

來源：http:/// 日期：2021-10-06

一、在開工前負責進行：

1、 Be responsible for:

原材料的驗證試驗、配合比設計等標準試驗及定線等測量工作

Standard tests such as verification test of raw materials, mix proportion design and alignment measurement

特殊材料或工藝的試驗、研究、論證及報批

Test, research, demonstration and approval of special materials or processes

施工準備情況的自檢

Self inspection of construction preparation

開工報告完成及報批。

Completion and approval of commencement report.

二、在施工過程中負責進行：

2、 Be responsible for:

進行工序及工藝過程的試驗檢測控制。糾正不良操作方法，改進和提高落后的工藝水平，控制工程的質量標準。

Carry out test, detection and control of process and process. Correct the bad operation methods, improve and improve the backward process level, and control the quality standard of the project.

記錄整理施工原始記錄。

Record and sort out the original construction records.

對完工的分項工程或部位進行自檢評定，形成自檢記錄，對自檢合格的工程提交轉序申請報告。

Conduct self inspection and evaluation on the completed subdivisional works or parts, form self inspection records, and submit sequence transfer application report for the works that pass the self inspection.

對工程施工過程中出現的各種影響施工和工程質量的情況、問題，及時進行協調、改正和處理。

Timely coordinate, correct and deal with various situations and problems affecting construction and project quality during project construction.

對工程中出現的質量事故負責按規定的程序和要求進行報告處理。

Be responsible for reporting and handling quality accidents in the project according to the specified procedures and requirements.
冷再生機租賃